Description

Cost-effective, water-based, acrylic product used for waterproofing. It is used with abe membrane. With the membrane, it provides a seamless liquid waterproofing solution.

APPLICATION AND USES

• Recommended for waterproofing stable flashings.

• Suitable for waterproofing parapet walls.

• Can be used to seal joints, gutters and laps and roofing screws on corrugated roofs.

FEATURES AND BENEFITS

• Multi-purpose system.

• For porous substrates, no separate primers are required.

• Exceptional weather resistance.

• Flexible and nontoxic with tough adhesion.

• Wide variety of colours are available.

COVERAGE/PERFORMANCE/CAPACITY

• Coverage: 2.1 L/m² full system.

INSTRUCTIONS FOR USE

Surface preparation

• Surfaces must be clean, dry and of good quality free from decay or damage.

• No laitance, grease, fungal growth or oils must be present on the substrate.

• Surfaces must be clear of loose, peeling and flaking particles.

Bonding or priming

• No priming is necessary for non-porous surfaces.

• Porous surfaces must be primed with a tidy coat of HYDROPROOF.

• Abe 4-metal primer should be used to prime metal surfaces.

How to apply

• First coat applied after the substrate has been primed: apply by brush/roller using 1 L/m². Embed abe® membrane into a wet coat, avoiding bubbles or wrinkles. Membrane overlaps minimum 100 mm on end laps and 75 mm on side laps.

• Second coat: once 1st coat has dried (2 – 3 hours), apply 2nd coat by brush/roller using 0,5 L/m² and ensure the membrane is fully saturated.

• Third coat: once the 2nd coat has dried, apply the 3rd coat at a different angle to the 2nd coat using 0,5 L/m².